Description
| ENGINE POWER: At flywheel 55 HP/DINENGINE: Fiat 8035.06 4 – Stroke, 3 Cylinders Direct Injection Diesel, Max. Power: 2500 rpm 55HP/DIN (41.0 kw) Max. Torque: 1500 rpm 185NM (18.88 Kgm) Dry Type Cylinder Liner Water Cooling Bore & Stroke: 100 x 115 mm. Piston Displacement: 2,710 cc. Compression Ratio: 17:1 Three row brass tube and copper fin radiator Force-feed lubrication system Distributor-type injection pump with mechanical speed governor Four-Bearing Crankshaft 12 Volt Starting System; 4 hp Motor 400 Watt Alternator 90/95 Ah Battery located in front of radiator Gearbox Mounted Starter Safety Switch Vertical Exhaust MufflerOPERATING WEIGHT: 1,710 Kg with 6.00-16 and 12.4/11-28 Tyres, hydraulic lift with three-point linkage cat. 1-2, square type fender with flat top.TRANSMISSION: Gearbox with Constant-Mesh Gears Gears: 8 Forward 2 Reverse Speeds Synchromesh: 3rd, 4th, 7th, and 8th Speeds Differential with Pedal Actuated Lock and Automatic Disconnection. Single-Reduction Spur Gear Final Drives.SPEEDS (KPH)
STEERING DRIVER’S SEAT FRONT AXLE CLUTCH POWER TAKE-OFF: FILTERS |
TYRES Front: 6.00-16 Rear: 12.4/11-28LIGHTING SYSTEM With 3-position headlights; rear position and number plate lights. 2-pole power connector (ASAE) Blue high beam warning light on dashboardBRAKES Service: dry, band-type with mechanical control Parking: with hand lever, on right of operatorTHREADS Front (8 positions) 1320 – 1420 – 1520 – 1620 – 1720n – 1820 – 1920 – 2020mmRear (8 positions) 1200 – 1300 – 1400 – 1500 – 1600 – 1700 – 1800 – 1900mmDIMENSIONS: (With 6.00-16 and 12.4/11-28 tyres) Wheelbase: 1,920mm Overall Length: 2,960mm Height to Top of Hood: 1,390mm Height to Steering Wheel: 1,490mm Front Tread (8 positions): 1,320 – 2,020mm Rear Tread (8 positions): 1,200 – 1,900mm Ground Clearance: 480mm under Front AxleOPTIONALS ENGINE Cold starting aid (Thermostat) Radiator screenTRANSMISSION Additional creeper speed reduction unit, for a total of 12 forward and 3 reverse speedsSTEERING Hydrostatic Power, with independent circuitPOWER TAKE-OFF 540 rpm (1 3/8″ – 6 spline shaft) Proportional ground speed, revolutions per approx. one metre forward travel (independently of gear engaged): 4.05HYDRAULICS Auxiliary control valve (right hand) for implement remote control with single or double acting rams TOWING ATTACHMENTS BELT PULLEY OPTIONAL EQUIPMENT: FUEL TANK HYDRAULIC LIFT |
